Dealer Portal
Service Bulletins
DSB135 – Incorrect Speedo Reading (Albatross, Emperor & Phantom)
DSB134 – Quick Guide for Controller Settings
DSB133 – Mustang Hi/Low Failure
DSB128 – Avenger Turning Circle Improvement
DSB127 – Limp Home Mode
DSB126 – Abnormal Driving Behaviour
DSB125 – Mustang Steering Freeplay Adjustment
DSB124 – Avenger Steering, Tiller & Wheel Alignment
DSB123 – Speedo Issues (Emperor & Albatross)
DSB122 – Safari Canopy Installation
DSB121 – Turning Sensor Settings
DSB120 – Basic Scooter Assembly
DSB119 – Bandit Issue with Pulling Apart
DSB118 – Transaxle Bearing Maintenance
DSB117 – Bandit (Rocking Issue Updated)
DSB115 – Bandit (Correct Connection of Power to Controller)
DSB116 – Tranzforma Disconnected Plug
DSB110 – Clock Speed Settings (Albatross & Phantom)
DSB (Dealer Service Bulletin) – Phantom Intermittent Stopping
Setting Clock – Changing the Time
Click here to download this video
Press the “MODE” button 3 times until the digital time displayed on the screen begins to flash.
To change the time press the left arrow to change the hour and the right arrow to change the mintues, until the screen shows the desired time.
Select the set button when complete.
MUSTANG – Unplug Turning Sensor
BANDIT – Back & Forth Rocking Issue
REFER MAY 2021 BULLETIN for updated repair instructions
We have have 2 instances of a Bandit rocking/jerking back & forth upon applying acceleration. Is is due to an issue with the program settings. Attached in this post are the instructions for rectifying this issue, please contact Top Gun Head Office to request program files.
MUSTANG – Steering Issues
There have been reported issues with the steering on the new Mustang, being the operator turns the tiller but the wheels don’t turn in succession. It is a simple fix and appears only some units have been affected and may require the Top Steering nut to be tightened. Please see video for further instruction on performing this action.
Click here to download this video
Setting Change – Temperature F to C
Click here to download this video
Press the “MODE” button 4 times until the temperature displayed on the screen begins to flash.
To change the degrees from F to celcius, press the H/L button until it shows the desired display.
Select the set button when complete.
Setting Change – Odometer MP/h to KM/h
Click here to download this video
Press the “MODE” button twice until the odometer reading begins to flash.
To adjust the reading of KM or M to the other, simply press the H/L button until your desired displayed appears on the screen.
Select the set button when complete.
Setting Change – Speedo MP/h to KM/h
Click here to download this video
Press the “MODE” button once, until the speedometer begins to flash.
To change the odometer reading to either KM/H or MPH, simply press the H/L button until your chosen display is shown,
Press the “SET” button when complete.